Soil cultivation with front mounting creates an ideal seedbed
Packers or rollers create a uniform seedbed surface and reduce the power requirement of the seedbed combination.
Especially with heavy soils, the additional use of tillage tools in front cultivation has proven and established. A front packer or a front roller not only replaces the front weight, this creates an ideal basis for further seedbed preparation. Also the soil compaction is reduced through the front axle of the tractor.
Regent offers with the front-packer and front-cutter two established systems for professional agriculture. While the front-packer works with pressure, the front-cutter cuts through the top layer of soil.
The Front Packer
The Regent front-packer consists of a ring roller and front working tools that can be adapted to the type of soil.
The large-dimensioned ring profiles ensure optimum reconsolidation and blockage-free working on a wide variety of soil types. In addition, the front packer can be equipped with a device for additional weights in extremely heavy soils. Another advantage: the front ring roller can be mounted as a trailing roller on the cultivator Tukan.Â
Adavantages in the Overview
- Diameter of the ring profiles: 610 mm
- Optionals for the front: spring tine section, knife tine section or vibro plate spring section
- Can be used rear-mounted with cultivator Tukan
- Even leveling of the plough clod
- No clogging and smearing

Easy-pulling and good reconsolidation
Front-Cutter
With the front cutter, double-row corrugated discs ensure a good shredding effect. Cutting tools are particularly useful in a high proportion of organic matter or in the treatment of intermediate greening and heavy soils. Also, blockages or heaps are avoided which could be caused by crop residues with long fibres. The 2-row knife-tine section can be preceded by a spring tine section or vibro plate spring section. The version type “T” is additionally equipped with a trailing cage roller as a depth guide. This is manually adjusted via a spindle.
Adavantages in the Overview
- Waved discs prevent sticking and clogging of work Tools
- Â Optionals for the front: spring tine section, vibro-plate spring section or 2-row knife tine section
- Â Easy to steer by trapezoidal guidance
- Extremely wear-resistant

Front-Cutter with cage roller and knife tine section
Technical Data Front-Packer and Front-Cutter
Front-Packer:
- 2,5 und 3 m working width
- Rollers ø600 mm
Front-Cutter:
- 3 m working width
- Discs ø510 mm

Front-Cutter with depth control roller and front knife tine section